METAL SOLUTIONS
FS121M
Accessible small frame metal laser sintering system
- Build Size: 120 × 120 × 100mm
- Laser Type: Fiber laser, 1 × 200W
FS301M
High quality and user-oriented machine for Metal AM production
- Build Size: 305 × 305 × 400mm
- Laser Type: Dual CO₂ Laser, 2 × 100W
FS271M
Brings both performance and price advantage
- Build Size: 275 × 275 × 340mm
- Laser Type: Fiber laser, 1 × 500W
FS421M
True manufacturing system capable of continuous production
- Build Size: 400 x 400 x 400mm
- Laser Type: Max. Dual fiber laser, 2 × 500W
POLYMER SOLUTIONS
eFORM
Entry level system with all the functionality and power of an industrial level system
- Build Size: 250 × 250 × 320mm
- Laser Type: CO₂ Laser, 1 × 30W
252P Series
Powerful, high temperature industrial 3D printing system
- Build Size: 250 × 250 × 320mm
- Laser Type: Max. CO₂ Laser, 1 × 100W
403P Series
Farsoon's flagship production polymer system
- Build Size: 400 × 400 × 540 or 400 × 400 × 450mm
- Laser Type: Max. CO₂ Laser, 1 × 100W
Flight HT403P Series
Next generation of high-speed plastic laser sintering
- Build Size: 400 x 400 x 540mm or 400 x 400 x 450mm
- Laser Type: Robust Fiber Laser
HT1001P
For intensive manufacturing cycles with little down time between builds
- Build Size: 1000×500×450mm
- Laser Type: Dual CO₂ Laser, 2 × 100W
METAL SOLUTIONS
Polymer Materials
PS1212-based Powder | Glass Bead Filled | Carbin Fiber Filled | Mineral Fiber Filled | PA11 Powder | PA6 Powder | PPS Powder | |||||
FS 3300PA | FS 3300PA-F | FS 3401GB | FS 3400CF | FS 3250MF | FS 4100PA | Ultrasint X043 | Ultrasint X028 | FS 8100PPS | FS 1092A-TPU | FS 1088A-TPU | |
General Priorities | |||||||||||
Bulk Density | 0.48g/cm3 | 0.45-0.55g/cm3 | 0.67g/cm3 | 0.51g/cm3 | 0.55g/cm3 | 0.49g/cm3 | 0.52g/cm3 | 0.52g/cm3 | 0.57g/cm3 | 0.64g/cm3 | 0.46g/cm3 |
Part Density | 0.95g/cm3 | 0.96g/cm3 | 1.26g/cm3 | 1.08-1.10g/cm3 | 1.20g/cm3 | 1.03g/cm3 | 1.14g/cm3 | 1.15g/cm3 | 1.28g/cm3 | 1.12g/cm3 | 1.20g/cm3 |
Color | White | Black | Gray | Black | Light Gray | White | Black | Light Yellow | Light Yellow | White | White |
Thermal Priorities | |||||||||||
Melting Point (10°C/min) ISO 11357.1:1997/ISO 11357
| 183°C | 179-185°C | 184°C | 184°C | 183°C | 203°C | 225°C | 220°C | 295°C | 169°C | 160°C |
Heat Deflection Temp(HDT) @1.82 Mpa ISO 75-2:2003/ GB/T 1040.2-2006
| 83.5°C | 70-85°C | 68.8°C | 72°C | 129°C | 49°C | 93°C | 100°C | 116°C | N/A | N/A |
Heat Deflection Temp(HDT) @0.45 Mpa ISO 75-2:2003 / GB/T 1040.2-2006
| 146.2°C | 135-155°C | 152.4°C | 168°C | 171°C | 150°C | 191°C | 199°C | 220°C | N/A | N/A |
Mechanical Priorities | |||||||||||
Tensile Strength | 46MPa | 40-50MPa | 44MPa | 65-70MPa | 51MPa | 49MPa | 74MPa | 78MPa | 47MPa | 18MPa | 20MPa |
Tensile Modulus | 1602MPa | 1700-1900MPa | 2644MPa | 4700-6500MPa | 6130MPa | 1542MPa | 3457MPa | 3550MPa | 3412MPa | 61MPa | 30MPa |
Elongation at Break | 36% | 5-20% | 9.3% | 3.0-4.0% | 5% | 58% | 4.0% | 13.0% | 3.8% | 276% | 340% |
Flexural Strength | 46.3MPa | 36-45MPa | 60.3MPa | 94-113MPa | 76MPa | 60MPa | 99MPa | 121MPa | 63MPa | 6.2MPa | N/A |
Flexural Modulus | 1300MPa | 1000-1150MPa | 2210MPa | 4500-5600MPa | 4633MPa | 1463MPa | 2842MPa | 3300MPa | 2906MPa | 86MPa | 27MPa |
Izod Impact Strength (notched) | 4.9 KJ/m² | 10-24 KJ/m² | 6.6 KJ/m² | 4.3 KJ/m² | 5.59 KJ/m² | 25 KJ/m² | 10.5 KJ/m² | 3.1 KJ/m² | 2.1 KJ/m² | No Break | No Break |
Izod Impact Strength (unnotched) | 13.2 KJ/m² | Tbd. | 31.1 KJ/m² | 16 KJ/m² | 20.78 KJ/m² | No Break | 67.2 KJ/m² | 9.7 KJ/m² | 5.7 KJ/m² | No Break | No Break |
Metal Materials
Titanium | Aluminium | Maraging Steel | Inconel | Stainless Steel | |||||||
FS Ti6AI4V
|
FS TA15
|
FS AISi10Mg
|
FS 18Ni300
|
FS IN718
|
FS IN625
|
FS GH3536
| FS 420 | FS 15-5PH | FS 17-4PH | FS 316 | |
General Priorities | |||||||||||
Density (g/cm3) |
≥ 4.40
|
≥ 4.45
|
≥ 2.65
|
≥ 8.00
|
≥ 8.18
|
≥ 8.40
|
≥ 8.30
|
≥ 7.70 |
≥ 7.76 |
≥ 7.70 |
≥ 7.90 |
Mechanical Priorities (As built) | |||||||||||
Tensile Strength (MPa) ISO6892-1 | 1150±70 | 1150±70 |
1160±70
|
430±70
|
1150±100
|
1100±70
|
1000±70
|
≥ 1100
| 1200±100 |
1050±100
|
6370±50
|
Yield Strength (MPa) ISO6892-1
|
1000±50
| N/A |
270±30
|
1050±100
|
800±70
|
730±70
|
650±70
| 900±100 |
725±100
| 900±100 | 550±50 |
Elongation after Fracture (%) ISO6892-1
|
8 ± 2
|
8 ± 2
|
3 ± 1 |
12 ± 3 | 24 ± 4 |
35 ± 5 |
30 ± 5 |
≥ 2
| 16 ± 4 | 16 ± 4 | 34 ± 5 |
Hardness HV ISO6507-1 / HRC ISO6508-1
|
360±30 HV5/15
| N/A |
140±20 HV5/15
|
35±3 HRC
|
300±20 HV5/15
|
270±10 HV5/15
|
270±5 HV5/15
| 48±3HRC |
32-37HRC
| N/A |
215±10 HV5/15
|
Mechanical Priorities (Heat Treated) | |||||||||||
Tensile Strength (MPa) ISO6892-1 |
1050±70
|
1100±20
|
350±50
|
1950±100
|
1350±100
|
1050±70
|
725±70
|
1000±100
| 1450±100 | N/A |
600±50
|
Yield Strength (MPa) ISO6892-1
|
950±50
|
1040±20
|
240±30
|
1900±100
| N/A |
700±70
| 330±70 MPa | N/A |
1130±100
| N/A | N/A |
Elongation after Fracture (%) ISO6892-1
|
12 ± 2
|
13 ± 2
|
6 ± 1 |
4 ± 2
|
16 ± 4 |
35 ± 5 |
43 ± 5
|
17 ± 5
|
14 ± 3
| N/A |
45 ± 5
|
Hardness HV ISO6507-1 / HRC ISO6508-1
|
330±30 HV5/15
| N/A |
75±20 HV5/15
|
53±3 HV5/15
|
430±30 HV5/15
| N/A | N/A |
32±4HRC
|
≥ 40HRC
| N/A |
190±10 HV5/15
|